The friction of the tires on the ground tends to cause noticeable wear on the ground paint. Together, oil leaks tend to stain the pavement permanently. These factors contribute to worsening the condition and image of the car park since it tends to increase the dirtiness of the space because dust adheres more quickly to the remains of spilled products. The best solution to this problem is to paint the garage floor regularly.
But is it possible to do it without spending too much money? Is there a way to paint fast to enable the garage in the shortest possible time? Of course!
This article teaches you how to paint your garage floor quickly and without exceeding your budget. Take notes on how to prepare the parking surface, what paint to choose, and how to calculate the amount of product for the pavement. Read on to get the job done like a pro!
How to prepare the surface?
Unlike other surfaces, the floor often complicates the paint job. The roughness of the materials, permanent dirt, and the spillage of viscous substances can become a real problem when painting the garage floor. Therefore, the challenge involved in this type of project is even more significant than painting walls or furniture.
The key to achieving a consistent, long-lasting finish is surface preparation. This process requires at least two fundamental steps. Find out what the requirements are to paint a parking lot floor!
Cleaning
The first step is to clean the garage floor. Start by removing all the objects that are on the ground. Then, you will have to sweep the entire surface. Then pass a mop with water. You can use a floor cleaner as long as the combination of the components of that product with the ones you will use later is not toxic.
Apply a degreasing substance to oil stains to remove them. It is not advisable to use kitchen grease-removing products even if they fulfill the same function a priori. Purchasing those industrial cleaning products made with specific compounds to destroy motor oil molecules is recommended. This way, you will get better results.
Repair
Once the surface is clean, it will be time to assess the condition of the floor. Cleaning makes it possible to detect holes, roughness, and damage in the pavement composition. You can cover the holes or cracks with cement to level the surface.
In some cases, by clearing the floor, the presence of moisture can be detected. If it is white spots, some products remove and waterproof the floor. When the problem stems from a water leak, it should be resolved before applying the first coat of paint.
Aspiration
Finally, you will have to sweep again. A vacuum cleaner is advisable to remove all traces of dust and excess materials. In this way, you will ensure that the surface is clean. Although the workspace is recommended to be ventilated, the ideal is that the windows are not at ground level but at waist level. In addition, you have to prevent the entry of large particles that can damage the finish.
How to paint preferable the garage floor?
The project’s second phase will begin once the surface is clear and clean. It’s time to apply the primer and paint to leave your garage looking new. If it is a new work, this phase is even more critical. If you do a good first job, you will have fewer problems in the future.
primer
The primer is crucial to guarantee the correct paint adhesion and achieve a better finish. This step can be avoided if it is a recurring painting, but it is essential for new-build car parks that have not been painted for the first time.
The product must be compatible with the epoxy paint used afterward. It is applied with a roller for floors that is more resistant than those for walls. An extension cord speeds up work and minimizes back pain in these cases.
Apply a thin, even layer. Try not to leave excess product so as not to cause more roughness. Follow the manufacturer’s instructions before, during, and after work, especially about drying time, which usually takes four to five hours.
The primer placement prepares the surface but does not offer a final finish. Therefore, applying one or two coats of paint is always necessary afterward.
Paint
When the primer is dry, you can start painting the floor of the parking lot. You can clean and use the identical roller with which you applied the previous product. Try moving the extension cord in different directions to cover the entire surface evenly. Do not overload the roller not to generate a surplus of paint.
Ideally, you should apply a second coat of paint after waiting for the drying time indicated by the product’s manufacturer. In this way, you will guarantee a better finish and a longer duration.
Lastly, you can add details on the floor. You can indicate the parking spaces if it is a garage that will house more than one vehicle. You can also use reflective paint to demarcate the boundaries when visibility is reduced, whether it is an underground car park or it will be used during low light hours.
What materials to use to paint the garage floor?
Painting the garage floor is not as complex as it seems. However, choosing what to paint the parking lot with is often challenging.
On the market, there is a wide range of products and materials to carry out renovation or new construction projects, which include the priming and painting phases. For this reason, you will find an extensive catalog of brands, manufacturers, and types of substances and accessories with different purposes.
Find out which garage materials and paint can achieve the best results below.
Tools needed
Before starting the project, having all the materials needed to do the job is essential. Having the tools and products to use will speed up the tasks. This way, you can focus on the final result and work with greater peace of mind.
For this project, you will need floor paint rollers. Unlike the rollers used to paint walls or furniture, these have a reinforced and resistant fabric. For the first layer, you can use a textured polyamide roller. At the same time, it is advisable to opt for a roller for fine floors during the second and last layers. If water-based epoxy paint is used, then it is advisable to choose microfiber rollers.
For the preparation of the surface, brushes, a broom, a dustpan, a bucket, and a mop will be necessary, as a domestic or industrial vacuum cleaner, depending on the extension of the surface and the work carried out. Trowels, cement, a bucket, and Mason’s trowels will be used for cracks and holes. Without these tools, painting the parking lot would be much more complicated.
Products needed to paint garage floors
Floor cleaning products are necessary to prepare the surface before painting the garage. Buy a substance that allows you to remove engine oil stains and another cleaning product that removes white moisture stains, if there are any. While preparing the floor, you may also need to make cement for repairs.
You will need a primer for the pavements to paint the parking lot. It is a transparent water-based epoxy resin of one or two components that seals and waterproofs the floor. Then, it would be best if you had epoxy floor paint. Keep in mind that there is a difference between paint for outdoor and indoor floors. So, if you have any doubts, consult the specialists at AwesomeOffersDaily to receive personalized advice.
How to calculate the paint to paint a floor?
The biggest challenge in painting garage floors is calculating the paint needed. Generally, a liter of paint usually covers between ten and twelve square meters of flooring. This reference is used for both paint and primer. It should only be taken into account that there are usually two layers of paint and, therefore, you should double the number of liters. To obtain better results, check this number with the manufacturer’s indications of the purchased paint.
